Show Upgrade - Motorola EX-3524 Cli Reference Manual

Command Usage
◆
This command is used in conjunction with the
to facilitate automatic upgrade of new operational code stored at the location
indicated by this command.
◆
The name for the new image stored on the TFTP server must be
EX3524_Op.bix. However, note that file name is not to be included in this
command.
◆
When specifying a TFTP server, the following syntax must be used, where filedir
indicates the path to the directory containing the new image:
tftp://192.168.0.1[/filedir]/
◆
When specifying an FTP server, the following syntax must be used, where filedir
indicates the path to the directory containing the new image:
ftp://[username[:password@]]192.168.0.1[/filedir]/
If the user name is omitted, "anonymous" will be used for the connection. If the
password is omitted a null string ("") will be used for the connection.
Example
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/
Console(config)#
This shows how to specify an FTP server where new code is stored.
Console(config)#upgrade opcode path ftp://motorola:billy@192.168.0.1/sm24/
Console(config)#

show upgrade

This command shows the opcode upgrade configuration settings.
Command Mode
Privileged Exec
Example
Console#show upgrade
Auto Image Upgrade Global Settings:
Status
Path
File Name : EX3524_Op.bix
Console#
: Disabled
:
– 99 –
Chapter 4
| System Management Commands
upgrade opcode auto
File Management
command