Multicast Filtering Commands; Igmp Snooping; Table 100: Multicast Filtering Commands; Table 101: Igmp Snooping Commands - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

20

IGMP Snooping

Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to check for any
attached hosts that want to receive a specific multicast service. It identifies the
ports containing hosts requesting a service and sends data out to those ports only.
It then propagates the service request up to any neighboring multicast switch/
router to ensure that it will continue to receive the multicast service.

Table 100: Multicast Filtering Commands

Command Group
IGMP Snooping
Static Multicast Routing
IGMP Filtering and
Throttling
Multicast VLAN Registration
This section describes commands used to configure IGMP snooping on the switch.

Table 101: IGMP Snooping Commands

Command
ip igmp snooping
ip igmp snooping
proxy-reporting
ip igmp snooping querier
ip igmp snooping
router-alert-option-check
ip igmp snooping
router-port-expire-time
ip igmp snooping tcn-flood
ip igmp snooping
tcn-query-solicit
Function
Configures multicast groups via IGMP snooping or static assignment,
sets the IGMP version, enables proxy reporting, displays current
snooping settings, and displays the multicast service and group
members
Configures static multicast router ports which forward all inbound
multicast traffic to the attached VLANs
Configures IGMP filtering and throttling
Configures a single network-wide multicast VLAN shared by hosts
residing in other standard or private VLAN groups, preserving security
and data isolation for normal traffic
Function
Enables IGMP snooping
Enables IGMP Snooping with Proxy Reporting
Allows this device to act as the querier for IGMP snooping GC
Discards any IGMPv2/v3 packets that do not include the
Router Alert option
Configures the querier timeout
Floods multicast traffic when a Spanning Tree topology
change occurs
Sends an IGMP Query Solicitation when a Spanning Tree
topology change occurs
– 459 –
Mode
GC
GC
GC
GC
GC
GC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents