Chapter 4
| System Management Commands
SMTP Alerts
SMTP Alerts
Table 19: show logging flash/ram - display description
Field
Syslog logging
History logging in FLASH
History logging in RAM
The following example displays settings for the trap function.
Console#show logging trap
Remote Log Status
Remote Log Facility Type
Remote Log Level Type
Remote Log Server IP Address : 1.2.3.4
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Console#
Table 20: show logging trap - display description
Field
Remote Log Status
Remote Log Facility Type
Remote Log Level Type
Remote Log Server IP
Address
Related Commands
show logging sendmail (120)
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
Table 21: Event Logging Commands
Command
logging sendmail
logging sendmail host
Description
Shows if system logging has been enabled via the
command.
The message level(s) reported based on the
The message level(s) reported based on the
: Enabled
: Local use 7
: Debugging messages
Description
Shows if remote logging has been enabled via the
command.
The facility type for remote logging of syslog messages as specified in
the
logging facility
command.
The severity threshold for syslog messages sent to a remote server as
specified in the
logging trap
The address of syslog servers as specified in the
command.
Function
Enables SMTP event handling
SMTP servers to receive alert messages
– 116 –
logging on
logging history
logging history
logging trap
command.
logging host
command.
command.
Mode
GC
GC