Safety; General; Warnings And Important Notices - Car-O-Liner CR510 Instruction Manual

CR500 range

2 Safety

2.1 General

2.2 Warnings and important notices

35201, ENG - rev. 3, 2006-03
The CR500 range has been designed and tested to meet strict safety require-
ments. Please read the following instructions carefully before operating the
CR500 range and refer to them as needed to ensure the continued safe opera-
tion of the welder.
Information provided in this manual describes the suggested best working
practices and should in no way take precedence over individual responsibili-
ties or local regulations.
Great effort has been placed on the design and manufacture of the CR500
range so that it will comply with all applicable safety aspects for this type of
equipment. During operation and other work, it is always each individual's
responsibility to consider:

Their own and other's personal safety.

The safety of the welder through correct use of the equipment in
accordance with the descriptions and instructions provided in this
manual.
By observing and following the safety precautions, users of the CR500 range
spot welder will ensure safer working conditions for themselves and their
fellow workers.
The following types of safety signs are used on the equipment and in
Car-O-Liner's instruction manuals:
Prohibited
Prohibits behaviour that can cause injury.
Command
Prescribes a specific responsibility or action.
Warning
Warns of risks for personal injuries and or damages to equipment.
Car-O-Liner AB
11