Troubleshooting - Car-O-Liner CR510 Instruction Manual

CR500 range

6 Troubleshooting

35201, ENG - rev. 3, 2006-03
The troubleshooting instructions in this chapter will help you to quickly find
and correct the most common faults that may occur when using the welder.
The error message list is useful in interpreting any error messages shown on
the display of the welder. The fault-tracing tables are useful when tracing
welder faults. The tables present the most common faults and their possible
causes. There may be additional faults and possible causes other than those
listed in the following tables.
WARNING! All electrical connections must be carried out by a qualified
electrician. Risk for electrical shock.
WARNING! Unplug the welder from the wall outlet before servicing,
cleaning or maintenance. Risk for electrical shock.
WARNING! Never remove any covers or perform any work to the welder
without unplugging the welder from the wall outlet. Risk for electrical
shock.
Car-O-Liner AB
53