Car-O-Liner AB
5.3 System information
Message
Service electrodes
Duty cycle, fuses
52
Cause
This message appears after a set
number of welds.
This message appears when there is a
risk of blowing the fuses.
Solution
Check that the electrode shape and size is
maintained. If not, exchange the cap (CR510 and
CR530) or dress the electrode. To confirm the
message, press any key to return to the chosen
program/welding. (The message locks the system
function).
Wait with the next weld until the warning disappears.
35201, ENG - rev. 3, 2006-03
CR500 range