Placement Of Safety Signs; Safety Devices - Car-O-Liner CR510 Instruction Manual

CR500 range

2.3.1 Placement of safety signs

2.4 Safety devices

35201, ENG - rev. 3, 2006-03
WARNING
Appropriate protection (protective gloves, visor, clothing and shoes) must be
worn when using this equipment.
WARNING
Sparks from welding could start a fire.
WARNING!
All electrical connections must be made by a qualified electrician.
Disconnect the supply before performing any service or installation work.
WARNING!
Do not exceed the recommended value (Max 250 daN) on the safety sign.
Risk for damage to the equipment.
WARNING!
Do not exceed the recommended value (Max 450 daN) on the safety sign.
Risk for damage to the equipment.
The safety signs are placed as follows:
Figure 2.1 Placement of safety signs.
If the c-tong is used frequently, the welding cables and the power trans-
former become very hot. To prevent the welder from malfunctioning due to
overheating, it is continuously cooled during operation.
Car-O-Liner AB
15