Car-O-Liner CR510 Instruction Manual page 13

CR500 range
35201, ENG - rev. 3, 2006-03
WARNING! It is very important to turn the handle firmly to fasten the
yoke.
WARNING! All service and maintenance must be carried out by Car-O-
Liner service personnel and service support. Risk for electrical shock.
WARNING! Never remove any covers or perform any work to the welder
without unplugging the welder from the wall outlet. Risk for electrical
shock.
WARNING! Unplug the welder from the wall outlet before servicing,
cleaning or maintenance. Risk for electrical shock.
WARNING! Don't remove any covers when cleaning the welder. Risk for
electrical shock.
WARNING! Do not exceed the recommended value (daN) on the safety
sign on the yoke. Risk for damage to the equipment.
IMPORTANT! Risk for damage to materials close to the weld, e.g to glass
or textiles.
IMPORTANT! Ensure that all electrical equipment within the welding
object is disconnected. Risk for interference.
IMPORTANT! For good cooling efficiency, never operate the welder
without connecting it to the compressed air network.
IMPORTANT! Read this manual carefully to become familiar with the
proper operation of the welder. Do not neglect to do this as improper
handling may result in personal injury and damage to the equipment.
IMPORTANT! The CR500 range may only be used by qualified
personnel. The user of the welder must have knowledge of spot welding and
of alignment of collision-damaged vehicles.
IMPORTANT! Do not turn off the welder while cooling is activated!
Car-O-Liner AB
13