CR500 range
1.2.1 Control panel
1.2.2 Multi-function gun
1.2.3 C-tong
Welding cable (+)
Welding cable (-)
35201, ENG - rev. 3, 2006-03
The control panel comprises the display, the pressure regulator and the
pressure gauge.The welding programs are set on the display and the
pneumatic air pressure are set on the pressure regulator.
The multi-function gun is used for the following weld programs:
• Carbon rod shrinking
• Dent pulling
• Welding of clip rivets
• Welding of screws
• Welding of ground screws
• Welding of nuts
• Stitch welding
• Single sided spot welding
The c-tong is used for Two sided spot welding.
Trigger
Piston
Welding
cable
Figure 1.2 The CR500 range
multifunction gun
Yoke
Piston electrode
Yoke electrode
Car-O-Liner AB
Lock nut
Tool holder
Trigger
9