Car-O-Liner CR510 Instruction Manual page 12

Double action medium frequency spot welder
Table of Contents

Advertisement

Car-O-Liner AB
CR500 range
The following warnings and important notices are used in the instruction
manual:
WARNING
Warning (in bold type) is used in this manual to indicate a possible danger
that could lead to personal injury. An instruction is normally given, followed
by a short explanation plus the possible effect if the instruction is not
followed.
IMPORTANT
Important (in bold type) is used to indicate a possible danger that could lead
to damage to the equipment and/or cause environmental damage.
Note: (in bold type) is used to accentuate supplementary information that is
required for problem-free use or optimal use of the welder.
In addition to the safety signs illustrated in section 2.3 "Safety signs", the
following warnings and important notices appear in the manual:
WARNING! Do not operate or place the welder near water, in wet
locations or outdoors. Risk for injuries or damage to the welder.
WARNING! Do not place the welder on unstable or uneven ground. The
welder might tip causing personal injuries or serious damage to the welder.
WARNING! All electrical connections must be made by a qualified
electrician. Risk for electrical shock.
WARNING! Loose cables and hoses present tripping risks. Risk of
injuries.
WARNING! Never spill liquid of any kind on the welder. Risk for injuries
or damage to the welder.
WARNING! Sparks from welding could start a fire. Risk for injuries.
WARNING! Make sure that you know where the fire extinguishing
equipment is. Risk for injuries.
WARNING! The tools or electrodes may be hot. Risk for burning injuries.
12
35201, ENG - rev. 3, 2006-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr530Cr500

Table of Contents