Safety; Safety Instructions - Car-O-Liner CTR12000 Instruction Manual

CTR12000

2 Safety

2.1

Safety instructions

41643, ENG - rev. 2, 2016-10
In order to ensure safe operation, only qualified staff is allowed to install the
machine observing all the instructions mentioned in the section "INSTAL-
LATION and ASSEMBLY".
Strictly comply with the safety instructions in the section "MAINTENANCE
AND UPKEEP" when servicing and maintaining the machine.
Remember in particular that the welding machine must be stopped and that
the compressed air supply must be cut off prior to any maintenance work on
electrodes.
We strongly recommend having this work done by qualified staff. All the
persons involved in works on the machine must be informed on possible
hazards and dangers and must have read and understood this manual.
Only authorized and qualified personnel is allowed to set up the machine
since this work interferes with operational safety.
It is strictly forbidden that more than one person is simultaneously working
on the machine.
Access to the machine must be restricted. Only authorized persons are al-
lowed to access the machine.
Pay attention to the safety instructions stated herein. If necessary, also in-
struct your staff to observe the notes and instructions.
In addition to the instructions stated in this section, strictly comply with the
national legal regulations being valid in the country where the machine is in-
stalled.
Car-O-Liner Group AB
11