Setting The Weld Program - Car-O-Liner CR510 Instruction Manual

CR500 range

4.5 Setting the weld program

35201, ENG - rev. 3, 2006-03
11. Scroll the five options in the "Save" menu, by clicking on the
buttons "Up" and "Down" .
12. Move to the field "Recall" by clicking on the buttons "Left"
"Right" .
13. Recall the personalized settings by clicking on the button "Up" .
14. Move to the field "Exit" by clicking on the buttons "Left"
"Right" .
15. Exit the "Save" menu by clicking on the button "Up" .
The c-tong has a built-in pneumatic feature that automatically compresses the
welding electrodes together when triggered.
Two sided spot welding can be used on both galvanized and stainless steel
sheets.
1. Select the "c-tong" application, refer to section 4.5 "Setting the weld
programs".
2. Set what metal the sheets to be welded are made of.
3. Select the thickness of the metal sheets to be welded.
Now, you have to select wether to use the automatic time and power values
or if you want to set the time and the power manually:
16. To use the automatic time and power values, select
manually set the time and power values, select
If you have chosen to use the automatic time and power values, go to in-
struction 7. If you want to set the time and power values manually, continue
at instruction 5.
17. Set the welding time.
18. Set the welding power.
Some of the programs have a pulse function that is indicated by this symbol .
Car-O-Liner AB
and
and
. To
.
27