Recalling The Personalized Settings - Car-O-Liner CR510 Instruction Manual

Car-O-Liner AB

4.4 Recalling the personalized settings

26
The second line in the "Save" menu (marked with 1-5) contains the person-
alized settings that have been previously saved.
NOTE: A total of five (5) options can be saved.
4. Make sure that the field "1-5" is active.
Now, you have to select the option (1-5) onto which you want to save the
new settings:
5. Scroll the five options in the "Save" menu, by clicking on the
buttons "Up" and "Down" .
NOTE: If no setting is saved on any of the five options, the option is
marked as being empty.
6. Move to the field "Save" by clicking on the buttons "Left"
"Right" .
7. Save the personalized settings by clicking on the button "Up" .
8. Move to the field "Exit" by clicking on the buttons "Left"
"Right" .
9. Exit the "Save" menu by clicking on the button "Up" .
Once a personalized setting has been saved on the welder, the setting can be
recalled. This is done as follows:
1. Click on the button "Save"
The second line in the "Save" menu (marked with 1-5) contains the person-
alized settings that have been saved.
10. Make sure that the field "1-5" is active.
Now, you have to select any of the options (1-5) from which you want to re-
call the personalized settings:
CR500 range
to open the "Save" menu.
35201, ENG - rev. 3, 2006-03
and
and