Oem Cr510, 530; Multi-Function Gun Applications; Carbon Rod Shrinking - Car-O-Liner CR510 Instruction Manual

CR500 range

4.7 OEM CR510, 530

4.8 Multi-function gun applications

Carbon rod Dent pulling
shrinking

4.8.1 Carbon rod shrinking

35201, ENG - rev. 3, 2006-03
Prepared for OEM weldning parameters.
1. Use the buttons "Up"
2. Use the buttons "Left"
3. Use the buttons "Up"
4. Use the button "Right"
5. Use "Up"
The multi-function gun can be fitted with a number of tools to further widen
the areas of use for the CR500 range. By connecting external accessories,
such as an air puller, CR500 range utilisation increases even more.
Welding of clip Welding of
rivets screws and
ground screws
Carbon rod shrinking is a multi-function gun application that is used to
shrink bumps on a metal sheet of a vehicle.
1. Select the "Multi function gun" application, refer to section 4.2.3
"Setting the weld programs".
2. Select weld program "Carbon rod shrinking" (refer to section 4.2.3
"Setting the weld programs").
3. Set the welding power.
IMPORTANT! Adjust the power according to the thickness of the metal
sheet.
and "Down"
and "Right"
and "Down"
to step to Program function.
and "Down" to chose a program.
Multi-function
gun applications
Welding of Welding of
ground nuts
screws
Car-O-Liner AB
to select Make.
to step to model function.
to select a model.
Stitch Single sided
welding spot welding
33