Creating An Ap Zone - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Creating an AP Zone

The first step in configuring the SCG is to create an AP zone. An AP zone functions
as a way of grouping APs and applying a particular set of settings (including WLANs
and their settings) to these groups of APs. Each AP zone can include up to six WLAN
services.
A zone called Staging Zone exists by default. Any AP that registers with the SCG
that is not assigned a specific zone is automatically assigned to the Staging Zone.
Follow these steps to create a new AP zone.
1 Click Configuration > AP Zones.
2 Click Create New.
Figure 31. Creating a new AP zone
3 Configure the options listed in
Table 12. Configuration options in the Create New Zone form
Option
General Options
Zone Name
Description
AP Firmware
SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A
Table 12.
Description
Type a name that you want to assign to this new zone.
Type a description for this new zone.
Displays the latest AP firmware available on the SCG. If
you want this zone to use a different firmware, click
Change , and then select a firmware from the list.
Configuring the SCG for the First Time
Creating an AP Zone
56