Pointing The Ap To Flexmaster; Enabling Logging And Sending Event Logs To A Syslog Server - Ruckus Wireless ZoneFlex 2925 User Manual

Table 23. TR-069 status information
Status Information
Current time

Pointing the AP to FlexMaster

Your ZoneFlex device is required to "call home" to register with your FlexMaster;
FlexMaster does not initiate initial contact. To register successfully with FlexMaster,
your ZoneFlex device must know the FlexMaster server's URL, thus entered on the
device.
To point the AP to FlexMaster
1. Go to Administrator > Management.
2. Under TR-069/SNMP Management Choice, click Auto.
3. In FlexMaster Server URL, type the URL of the FlexMaster server.
4. Toggle the Contact FlexMaster every drop-down list to select how frequently
the device will check the FlexMaster server for any pending configuration changes
available for that ZoneFlex unit. On the FlexMaster side, this field is referred to as
the Periodic Inform Interval.
5. Click Update Settings to save your changes.
After the AP registers with FlexMaster, this Administration > Management page will
show the communication status between the AP and FlexMaster.
Enabling Logging and Sending Event Logs to
a Syslog Server
If you have a syslog server on the network, you can configure the Access Point to send
the device logs to the server. You will need to enable logging (logging is disabled by
default), and then configure the Access Point to send logs to the syslog server.
1. Go to Administration > Log. The Administration :: Log page appears.
2. Look for Log Status, and then click Enabled.
3. After enabling logging, configure the following options:
• Syslog Server Address [Optional]: To enable the AP to send messages to a
syslog server as they appear, enter the IP address of the syslog server.

Enabling Logging and Sending Event Logs to a Syslog Server

Description
Shows the current date and time as known to
the AP. This timestamp is accurate is an NTP
server is configured on the AP. If there is no
NTP server configured, this timestamp is
useful as a reference for comparison of the
timestamps for Last attempted contact and
Last successful contact.
Managing the Access Point
75