Pointing The Ap To Flexmaster - Ruckus Wireless ZoneFlex series User Manual

Status Information
Last Attempted Contact
Last Successful Contact
Last Contact Result
Current Time

Pointing the AP to FlexMaster

Use the following procedure to configure the AP for FlexMaster management.
Your Ruckus Wireless device is required to "call home" to register with your FlexMaster;
FlexMaster does not initiate initial contact. To register successfully with FlexMaster, your
Ruckus Wireless device must know the FlexMaster server's URL, thus entered on the
device. You need TCP ports 80 and 443 between APs and FlexMaster when traversing
Layer 3/firewall boundaries.
1. Go to Administration > Management.
2. Under TR-069/SNMP Management Choice, click Auto.
3. In FlexMaster Server URL, type the URL of the FlexMaster server.
4. Toggle the Periodic FlexMaster Inform Interval drop-down list to select how
frequently the device checks the FlexMaster server for any pending configuration
changes available for that Ruckus Wireless unit. On the FlexMaster side, this field is
referred to as the Periodic Inform Interval.
5. Click Update Settings to save your changes.
After the AP registers with FlexMaster, this Administration > Management page will
show the communication status between the AP and FlexMaster.
ZoneFlex Indoor Access Point Release 104.0 User Guide
Pointing the AP to FlexMaster
Description
Shows the date and time of the AP's last
attempt to contact FlexMaster. Date and
time are specified in GMT (or UTC), which
are accurate if a Network Time Protocol
(NTP) server is configured.
Shows the date and time of the AP's last
successful contact with FlexMaster.
Shows the result of the last attempt to
contact FlexMaster (success or failure, and
failure error code if applicable).
Shows the current date and time as known
to the AP. This timestamp is accurate if an
NTP server is configured on the AP. If there
is no NTP server configured, this timestamp
is useful as a reference for comparison of
the timestamps for
Last attempted contact and
Last successful contact.
Administration
139