Pointing The Ap To Flexmaster - Ruckus Wireless ZoneFlex 7982 User Manual

Table 41 lists the TR-069 status information that the AP provides.
Table 41. TR-069 status information
Status Information
Currently using
Last attempted contact
Last successful contact
Last contact result
Current time

Pointing the AP to FlexMaster

Your ZoneFlex device is required to "call home" to register with your FlexMaster;
FlexMaster does not initiate initial contact. To register successfully with FlexMaster,
your ZoneFlex device must know the FlexMaster server's URL, thus entered on the
device. You will need TCP ports 80 and 443 between APs and FlexMaster when
traversing Layer 3/firewall boundaries.
To point the AP to FlexMaster
1. Go to Administration > Management.
2. Under TR-069/SNMP Management Choice, click Auto.
3. In FlexMaster Server URL, type the URL of the FlexMaster server.
4. Toggle the Contact FlexMaster every drop-down list to select how frequently
the device will check the FlexMaster server for any pending configuration changes
available for that ZoneFlex unit. On the FlexMaster side, this field is referred to as
the Periodic Inform Interval.
5. Click Update Settings to save your changes.
After the AP registers with FlexMaster, this Administration > Management page
will show the communication status between the AP and FlexMaster.
Enabling Other Management Access Options
Description
Shows the FlexMaster server IP address or URL
with which the AP is currently registered
Shows the date and time of the AP's last attempt
to contact FlexMaster. Date and time are
specified in GMT (or UTC), which are accurate if a
Network Time Protocol (NTP) server is configured.
Shows the date and time of the AP's last successful
contact with FlexMaster.
Shows the result of the last attempt to contact
FlexMaster (success or failure, and failure error
code if applicable).
Shows the current date and time as known to the
AP. This timestamp is accurate if an NTP server is
configured on the AP. If there is no NTP server
configured, this timestamp is useful as a reference
for comparison of the timestamps for Last
attempted contact and Last successful contact.
Managing the Access Point
117