Configuring the Access Point
Configuring Device Settings
Configuring Device Settings
Device settings refer to the device name, temperature update, location and service
provider login settings. (Temperature update is only available on certain ZoneFlex
models.)
Figure 28.
The Configuration > Device page
To configure the device settings
1. Go to Configuration > Device. The Configuration > Device page appears.
2. In Device Name, type a new name for the device or leave as is to accept the default
device name (RuckusAP). The device name identifies the Access Point among
other devices on the network.
3. Optionally, enter Device Location and GPS Coordinates to keep track of the
physical location of the AP. In Temperature Update (specific models only), enter
the interval (in seconds) to record the internal temperature of the device.
4. Under Service Provider Login, change the login information as required:
•
Username: Type the name that you want to use for logging into the Web
interface. The default user name is super.
•
Password: Type the new password that you want to use. The default password
is sp-admin. The password must consist of six to 32 alphanumeric characters
only.
•
Confirm New Password: Retype the new password to confirm.
54