Configuring Wireless # Settings - Ruckus Wireless ZoneFlex 7781CM Installation Manual

Configuring the AP for Management by FlexMaster or for Standalone Operation

Configuring Wireless # Settings

The settings on at least one Wireless # tab are required to enable wireless devices to
associate with the AP. The default wireless settings are listed in
Table 9. Default wireless settings
Setting
SSID (network name)
Encryption Method (security)
1. Click one of the Wireless # tabs. The selected Wireless # page appears
Figure 20. The Configuration > Radio 2.4 > Wireless 1 tab
2. In Wireless Availability, click Enabled.
3. In Broadcast SSID, click Enabled.
4. Clear the SSID box, and then type a unique and descriptive name that you want to call
this wireless network.
For example, you can type Ruckus Wireless AP. This SSID is the name that helps
users identify this wireless network in their wireless network connection application.
Preparing the 7781CM at the Depot and Shipping to the Field
Default Value
Wireless 1 to Wireless 8 (8 WLANs)
Disabled on all WLANs
Table 9.
(Figure 20).
33