Configuration; Configuring The Ap; Configuring Device Settings - Ruckus Wireless ZoneFlex series User Manual

Configuration

Configuring the AP

Configure Device, Internet and Wireless settings for standalone operation or FlexMaster
management.
NOTE If you plan to manage your Ruckus Wireless network using SmartZone or
ZoneDirector controller, refer to their respective user documents, available from the
Ruckus Wireless Support site: http://support.ruckuswireless.com.
If the AP is to be run in a standalone configuration or is to be managed by a FlexMaster
manager, then continue with this section.
In this chapter:
•

Configuring Device Settings

• Configuring Internet Settings
• Configuring Wireless Settings
• Configuring Ethernet Ports
• Configuring Hotspot Service
Configuring Device Settings
Device settings refer to the device name, location, service provider login and other
settings.
NOTE Some configuration options are available on specific AP models only.
1. Select Configuration > Device. The Configuration > Device page appears.
ZoneFlex Indoor Access Point Release 104.0 User Guide
on page 90
on page 92
on page 99
on page 116
on page 121
90
4
90