[Device Setting] - Muratec MFX-C2828 User Manual

2.1 Basic settings for TCP/IP communication
[DNS Host]
Item
[Dynamic DNS Set-
tings]
[DNS Host Name]
[DNS Domain]
Item
[Domain Name
Auto Retrieval]
[Search Domain
Name Auto Re-
trieval]
[Default DNS Do-
main Name]
[DNS Search Do-
main Name 1] to
[DNS Search Do-
main Name 3]
[DNS Server Settings (IPv4)]
Item
[DNS Server Auto
Obtain]
[Priority DNS Serv-
er]
[Secondary DNS
Server 1] to [Sec-
ondary DNS Server
2]

[Device Setting]

In [Administrator Settings] on the Control Panel, select [Network Settings] ö [Forward] ö [Detail Settings]
ö [Device Setting].
Description
Select [Enable] when automatically registering the host
name specified in [DNS Host Name] with the DNS server
that supports the Dynamic DNS function.
Specify the host name of this machine (up to 63 charac-
ters).
Description
Select whether to automatically obtain the domain name.
This item is necessary when DHCP is enabled.
Select whether to automatically obtain the search domain
name.
This item is necessary when DHCP is enabled.
When not automatically obtaining the domain name,
specify the name of the domain that contains this machine
(up to 255 characters, including the host name).
Specify the DNS search domain name (up to 253 charac-
ters).
Description
Select whether to automatically obtain the DNS server ad-
dress.
This item is necessary when DHCP is enabled.
Enter the address of the primary DNS server if you do not
obtain the DNS server address automatically.
Specify the addresses of the secondary DNS servers.
2
Prior check
Is Dynamic DNS
supported?
Prior check
Can it be obtained
automatically using
DHCP?
Can it be obtained
automatically using
DHCP?
Default Domain
Name
Prior check
Can it be obtained
automatically using
DHCP?
Server address
Server address
2-3