Security Fax Functions; Closed Communications - Muratec MFX-3510 User Manual

Security fax functions

Closed communications

When closed communication is set, fax messages are transmitted and received between
Muratec machines only (excluding some models).
Closed communication can be set separately for transmission and reception.
„ Setting the closed transmission
1
Press <Menu>．
2
Press [Setting].
3
Select "Management", and press [Enter].
If an administrator password is set, enter the password and press [Enter].
4
Select "Security Communication", and press [Enter].
5
Select "Closed Transmission", and press [Enter].
6
Select "ON" to perform closed transmission, and press [Enter].
Select "OFF" to deselect the setting.
7
Press [Close].
NOTE
• If a passcode is set, faxes can only be transmitted to Muratec machines that also
have a security function and have the same passcode registered. For the passcode
setting, see
• For details on the communication range using closed communication and passcode,
see "Communication and range of passcodes" (page
• When using manual transmission
disabled, even if you set it to ON.
• Even if this setting is ON, you can set the closed transmission OFF only for one
transmission when you set the setting off from the advanced settings.
4-14

Security fax functions

"Registering a passcode" (page 4-16).
4-17).
(page 3-3), the closed transmission function is