[Line Parameter Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting]
Configure the environment to use fax functions with this machine, such as the types of telephone lines (dialing
method) and fax receive mode.
Settings
[Dialing Method]
[Receive Mode]
[Number of RX Call Rings]
[Number of Redials]
[Redial Interval]
[Line Monitor Sound]
[Line Monitor Sound Vol-
ume (Send)]
[Line Monitor Sound Vol-
ume (Receive)]
[Dialing Method]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Dialing Method]
Select the line type according to your environment.
[PB] is specified by default.
[Receive Mode]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Receive Mode]
Select a receive mode.
Settings
[Auto RX]
[Manual RX]
[Number of RX Call Rings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Number of RX Call
Rings]
If necessary, change the number of times the phone rings before automatically receiving a fax.
[2 x] is specified by default.
Description of Setup Buttons (Administrator Settings)
Description
Select the line type according to your environment.
For details on settings, refer to page 11-19.
Select a receive mode.
For details on settings, refer to page 11-19.
If necessary, change the number of times the phone rings before automat-
ically receiving a fax.
For details on settings, refer to page 11-19.
If the machine fails to send a fax successfully, it automatically redials the
same destination after the elapse of a certain period of time. If necessary,
change the number of redials.
For details on settings, refer to page 11-20.
If necessary, change the redial intervals when you specified a value in
[Number of Redials].
For details on settings, refer to page 11-20.
Select whether to monitor sounds on the telephone line during fax commu-
nication.
For details on settings, refer to page 11-20.
Monitors sounds output from the machine. Specify the monitor sound vol-
ume between 0 and 31.
For details on settings, refer to page 11-20.
Monitors sounds output from the recipient, including switching equipment
or TA. Specify the monitor sound volume between 0 and 31.
For details on settings, refer to page 11-20.
Description
Automatically starts receiving a fax if the sender is a fax device.
[Auto RX] is specified by default.
Manually request the reception of a fax.
Select this option when this machine is used with a telephone connected
to it, which is frequently used, and if you always prefer to receive faxes
manually.
11
11-19