C
OMMAND
The no rspan session command must be used to disable an RSPAN VLAN
before it can be deleted from the VLAN database (see the
E
XAMPLE
Console(config)#no rspan session 1
Console(config)#
Use this command to displays the configuration settings for an RSPAN
show rspan
session.
S
YNTAX
show rspan session [session-id]
session-id – A number identifying this RSPAN session.
(Range: 1-2)
Only two mirror sessions are allowed, including both local and
remote mirroring. If local mirroring is enabled with the
command, then there is only one session available for RSPAN.
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show rspan session
RSPAN Session ID
Source Ports (mirrored ports)
RX Only
TX Only
BOTH
Destination Port (monitor port) : Eth 1/2
Destination Tagged Mode
Switch Role
RSPAN VLAN
RSPAN Uplink Ports
Operation Status
Console#
U
SAGE
M
ODE
: 1
: None
: None
: None
: None
: Untagged
: Destination
: 2
: Eth 1/3
: Up
– 759 –
| Port Mirroring Commands
C
29
HAPTER
RSPAN Mirroring Commands
vlan
command).
port monitor