Rcommand; Show Cluster - Edge-Core Direk Tronik 24/48-Port Management Manual

61
Switch Cluster Commands

rcommand

This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id <member-id>
member-id - The ID number of the Member switch. (Range: 1-36)
Command Mode
Privileged Exec
Command Usage
• This command only operates through a Telnet connection to the Commander
switch. Managing cluster Members using the local console CLI on the
Commander is not supported.
There is no need to enter the username and password for access to the
•
Member switch CLI
Example
Vty-0#rcommand id 1
CLI session with the 24/48 L2/L4 GE Switch is opened.
To end the CLI session, enter [Exit].
Vty-0#

show cluster

This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role:
Interval heartbeat:
Heartbeat loss count: 3
Number of Members:
Number of Candidates: 2
Console#
61-4
.
commander
30
1