7558-xxx
Finisher removal procedures
Booklet bin assembly removal
Disconnect booklet hookup cable assembly from the booklet bin assembly.
1.
Remove the screw securing the booklet bin assembly (A) to the finisher.
2.
Remove booklet bin assembly (A).
3.
Booklet bin hookup cable assembly removal
1.
Disconnect booklet hookup cable assembly from the booklet bin assembly.
Remove rear lower cover. See
2.
Disconnect the booklet bin hookup cable assembly from the rear of the finisher.
3.
Release the clamps securing the booklet bin hookup cable assembly from the finisher.
4.
Service Manual
4-318
"Upper media bin front cover removal" on page
4-420.
Previous
Next
Go Back