Rear Center Lap/Shoulder Belt Retractor Lockout - Four-Door Models Only; Lap/Shoulder Belt Untwisting Procedure - Jeep Wrangler 2014 Owner's Manual

Hide thumbs Also See for Wrangler 2014:

Table of Contents

58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Rear Center Lap/Shoulder Belt Retractor Lockout —

Four-Door Models Only

This feature is designed to lock the retractor whenever

the 60% rear seatback is not fully latched. This prevents

someone from wearing the rear center lap/shoulder belt

when the rear seatback is not fully latched.

• If the rear center lap/shoulder belt cannot be pulled

out, check that the rear seatback is fully latched.

• If the rear seatback is properly latched and the rear

center lap/shoulder belt still cannot be pulled out, the

Automatic-Locking Retractor (ALR) system may be

activated. To reset this feature you must let all of the

belt webbing return into the retractor. You will not be

able to pull out more webbing until all of the webbing

has been returned back into the retractor.

The rear center lap/shoulder belt is equipped with a

lock-out feature to ensure that the rear seatback is in

the fully upright and locked position when occupied.

If the rear seatback is not fully upright and locked

and the rear center lap/shoulder belt can be pulled

out of the retractor, the vehicle should immediately

be taken to your authorized dealer for service. Failure

to follow this warning could result in serious or fatal

Use the following procedure to untwist a twisted lap/

shoulder belt.

1. Position the latch plate as close as possible to the

anchor point.

Chapters

Table of Contents