Table of Contents
Advertisement
STARTING AND OPERATING
KEYLESS ENTER 'N GO™ —
PASSIVE ENTRY
Keyless Enter 'n Go™ — Passive Entry allows you
to lock and unlock the vehicle's door(s) and
swing gate without having to push the key fob
lock or unlock buttons.
To Unlock/Lock The Vehicle's Doors And Swing
Gate
With a valid Passive Entry key fob with you, grab
the handle to unlock the vehicle. The driver's
handle will unlock the driver's door only (unless
otherwise programmed in Uconnect Settings),
whereas the passenger handle will unlock all
doors and the swing gate.
With a valid Passive Entry key fob on you, push
the Passive Entry lock button on the door handle
to lock the vehicle.
Push The Door Handle Button To Lock
NOTE:
•
DO NOT grab the door handle when pushing
the lock button. This could unlock the door(s).
•
Be sure to keep the vehicle key fob with you.
Use this QR code to access your
digital experience.
KEYLESS ENTER 'N GO™ —
IGNITION (PHEV MODELS)
Pushing the Keyless Push Button Ignition may
only activate the Electric Propulsion system and
not start the vehicle's engine (if running the
engine is not currently required by the Hybrid
system). READY will show in the instrument clus-
ter display whenever the vehicle is operating in
Electric mode and the vehicle is stationary.
Keyless Push Button Ignition
The Keyless Push Button Ignition has several
Scan me
operating modes that are labeled and will illumi-
nate when in position. These modes are OFF,
ACC, RUN, and START.
INTERIOR
9
Advertisement
Table of Contents
