When Use The 440Cc Ink Cartridges [Use 440Cc] - MIMAKI JV3-75 SP II Operation Manual

When use the 440cc ink cartridges [USE 440cc]

In case of JV3-75SPII, 440cc cartridges and protection cover are optional items.
When 440cc cartridges is used on JV3-75SPII, the following steps are required.
• The protection cover is separately available from your local distributor.
• This function corresponds only to case where 440cc cartridge is first set on
JV3-75SPII. When 440cc cartridge is not set, this function will not displayed.
Further, this operation is not required in the case of JV3-130SPII.
STEP
1. Attach the protection cover, and set the 440cc
ink cartridges.
Refer to "Attachment procedure of protection cover for 440cc
ink cartridges".
2. Select the [USE 440cc].
3. Press the [ENTER] key.
4. Press the [ ] key.
When the protection cover is not attached, press the [ ] key.
5. Press the [END] key twice.
The device returns to the LOCAL mode.
In the event the protection cover is not attached, the indica-
tion will become as shown in the right.
Attach the protection cover.
TWICE
- 5.22 -
MAINTENANCE
USE 440cc
Set a cover ?
YES < > NO
MAINTENANCE
USE 440cc
< LOCAL >
width : 1272 mm
< LOCAL >
KKMMCCYY
<ent>
<ent>