Cleaning The Head Sides - MIMAKI JV3-75 SP II Operation Manual

Cleaning the head sides

As the device is used to plot images, the head sides gradually become stained with ink and dust.
Open the maintenance cover, and wipe the head sides with a cotton bud.
• Be sure to wear the supplied goggle and gloves.
Ink is organic solvent. If you get ink your eyes or skin, immediately wash
with a lot of water.
STEP
1. Turn on the power to the device.
Page 2.3
2. Remove three knobs, open the maintenance
cover.
3. Move the head with your hand to the extreme
left.
4. Wipe off ink or dirt the head sides using cotton
buds.
5. Return the head with your hand to extreme
right.
6. Attach the maintenance cover.
Fasten three knobs that removed in STEP2.
7. Turn off the power to the device.
page 2.29
- 3.6 -