Adjustments When Using Sublimation Transfer Ink - MIMAKI JV300-130 Installation Manual
Hide thumbs
Also See for JV300-130:
- Maintenance manual (245 pages) ,
- Operation manual (104 pages) ,
- Requests for care and maintenance (17 pages)
Table of Contents
Advertisement
INSTALLATION GUIDE > Ink Set > Adjustments When Using Sublimation Transfer Ink
Issue
Model
JV300
5.2 Adjustments When Using Sublimation Transfer Ink
When using sublimation transfer ink (water ink), perform the following adjustments to avoid media cockling.
Adjustment of the Station Height
Work procedures
Screw of Cover fulcrum pin BKT
Front panel cover M
Cover fulcrum pin BKT
Front cover
© 2014 MIMAKI ENGINEERING CO.,LTD.
Revised
2014.04.11
1. Loosen the screw of cover fulcrum pin BKT which is at the
2. Shift the cover fulcrum pin BKT to right, and remove the front
3. Remove the front cover.
4. Move the head over the platen.
F/W ver. 1.00 Remark
left side of front panel cover M.
panel cover M.
Rev.
1.0
1
2
3
4
5
6
7
5.2
R.1.0
P.8
Advertisement
Table of Contents
