Where To Install The Device - MIMAKI JV3-75 SP II Operation Manual

Where to install the device

Secure a suitable installation space before assembling the device.
The place of installation must have space required not only for the device itself but also for plotting
operation.
Model
JV3-75SPII
JV3-130SPII
500 mm
Working environmental temperature
This equipment should be used at 20-35
According to the surrounding temperature condition, the temperature may not rise to the set value.
Width Depth
1850 mm 750 mm
2390 mm 750 mm
JV3-75SPII
JV3-130SPII
o C to implement a stable print.
Height Gross weight (with exhaust unit)
1240 mm About 120kg
1240 mm About 165kg
* The exhaust unit is available as an option for JV3-75SPII.
2850 mm
3390 mm
- 1.2 -
(About 130 kg)*
(About 175 kg)
500 mm