Heater Panel - MIMAKI JV3-75 SP II Operation Manual

Heater panel

The platen has heater built-in for printing and pre-printing. Turns on/off the power of the heaters and
displays their statuses with LED indicators. When the power switch of the device is turned off, the
power of the heaters is also turned off.
HEAT indicator
Lights in orange while the
print heater is being heated.
• The HEAT indicator may go off while the CONSTANT indicator is lighting.
This is not an error but an indication that the temperature of the print heater
have reached the set temperature and heating is interrupted.
CONSTANT indicator
Lights in green when the
temperature of the print heater
reaches the set temperature.
HEAT indicator
Lights in orange while the
print heater is being heated.
- 1.7 -
Heater power switch
Turns on/off the power of the
heaters
CONSTANT indicator
Lights in green when the
temperature of the print heater
reaches the set temperature.