Media sensor
The media sensor detects the presence of the media and the media length.
There is a media sensor on the platen.
• Set up media to cover media sensor at the back side of platen absolutely.
If the part of media is not on media, the media con not be detected.
Cutter blade and cutting line
The carriage is provided with a cutter unit for cutting off the media that has been plotted on.
The cutting line along which to cut off the media is shown below.
"Cutting by Hand" (page 2.26) "Automatic Cutting [AUTO CUT]" (page 4.8).
Cutter blade
Media sensor
Cutting Line
Cutting line
- 1.10 -