Effective Plotting Area - MIMAKI JV3-75 SP II Operation Manual

Effective Plotting Area

The device has an area which cannot perform printing, due to mechanical reasons.
This area is called " dead space".
15 mm
Media
feeding
direction
• In the case of high speed scanning mode of JV3-130SPII, the maximum
drawing range would be 1321 mm. Further, in the case of 1440x1440 dpi
set with 6 color ink, the maximum drawing range would be 1000 mm.
• Changing the effective printing area...
Initial value of dead space for right and left of media is 15 m each.
The effective plotting area can be changed by changing the dead space.
Dead space is set with [MARGIN] in FUNCTION mode.
0 mm
Effective
15 mm 15 mm
printing
area
25 mm
Roll
media
- 4.13 -
110 mm
Effective
15 mm
printing
area
65 mm
Cut sheet
media
page4.9