Setting Time [Time Set] - MIMAKI JV3-75 SP II Operation Manual

Setting time [TIME SET]

The device incorporates a calender. [TIME STAMP] function of the FUNCTION mode displays the
date and time depending on this setting.
STEP
1. Select the [TIME SET].
2. Press the [ENTER] key.
3. Set the date.
Press the [ ] and [ ] jog keys to select the digit.
Press the [ ] and [ ] jog keys to change the value.
• Not available to set the past date.
4. Press the [ ] and [ ] key to select the [TIME].
5. Set the time.
Press the [ ] and [ ] jog keys to select the digit.
Press the [ ] and [ ] jog keys to change the value.
6. Press the [ENTER] key.
7. Displays the set date.
Press the [ ] and [ ] jog keys to display the time setting.
8. Press the [END] key twice.
The device returns to the LOCAL mode.
page 4.10
TWICE
- 5.23 -
MAINTENANCE
TIME SET
MAINTENANCE
DATE = 2 0 0 2 . 1 0 . 0 2
MAINTENANCE
TIME = 1 6 : 2 0 : 0 7
MAINTENANCE
DATE = 2 0 0 2 . 1 0 . 0 2
< LOCAL >
width : 1272 mm
< ent >