Setting suitable heater temperature
The following describes the procedure for setting the suitable heater temperature at the time of
heater temperature depends on the media type and ambient temperature.
Set a temperature which is suitable for each media. Non-coated media and media with a long ink
drying time improve the ink fixing and drying characteristics.
Set a suitable heater temperature with the following procedure.
• When using SS2 ink, set the heater temperature (both Pre/Print) at 35
Lower the heater
temperature
Raise the heater
temperature
Set the heater temperature
Leave until the CONSTANT indicator goes on.
Is media wrinkled?
YES
Does media stick to platen?
YES
Correct the media feed rate
Test plotting
Does beading occur?
YES
End
- 4.11 -
page 2.18
NO
NO
page 2.22
NO
page 2.18,4.5
o
C.
Initially, set a high
temperature
Press jog keys to
move the media
back and forth