Types Of Media That Can Be Used - MIMAKI JV3-75 SP II Operation Manual

Types of media that can be used

The types of media that can be used with the device are roll media and cut sheet media.
The types and sizes of media that can be used with the device are explained below.

Types of media that can be used

• Tarpaulin
• FF (Flexible Face)
• PVC
Sizes of media that can be used
Media Size
Maximum
Minimum
Plotting width
Thickness
Roll weight *2
Roll outside diameter Ø 180 mm or less
Roll inside diameter
Plotting surface
Roll end treatment
Maximum
Minimum
Plotting width
JV3-75SPII
810 mm
210 mm
*1 800 mm
1.0 mm or less
15 kg or less
In case attaching roll holder to the most upper parts, roll outside diamiter is Ø 140 mm or less.
3 or 2 inches
Faces OUT
Light-adhesive tape is used to allow the paper to be removed from the core with ease.
810 mm
210 mm
*1 800 mm
*1 In the case of high speed scanning mode of JV3-130SPII, the maximum drawing range would
be 1321 mm. Further, in the case of 1440x1440 dpi set with 6 color ink, the maximum
drawing range would be 1000 mm.
*2 Without slack on the roll when it is retained at both ends.
1371 mm
210 mm
1610 mm
1.0 mm or less
25 kg or less
1371 mm
210 mm
1361 mm
- 1.13 -
JV3-130SPII