Chapter 6 When Abnormal Conditions Are Encountered - MIMAKI JV3-75 SP II Operation Manual

When abnormal conditions are encountered
Chapter 6 describes corrective measures to be taken in the case where an abnormal
phenomenon arises on the device and where an error message is given on the display.
Before taking a phenomenon as a sign of failure .......................................... 6.2
The device cannot be energized ..................................................................... 6.2
The device cannot perform printing ................................................................. 6.2
Paper jamming arises/media is soiled ............................................................. 6.3
The [HEAT] or [CONSTANT] indicator does not go on ..................................... 6.3
If image quality declines ................................................................................ 6.4
While lines/thin spots are obvious or dark stripes occur (In the direction of travel
of the head) ..................................................................................................... 6.4
Characters fluctuate doubly or triply into paper feed ....................................... 6.4
Displacement is observed between outward and inward printing ................... 6.4
The respective color ink injected by the respective color heads do not properly
overlap ............................................................................................................. 6.4
Large ink drop on media.................................................................................. 6.4
Troubles for which error messages are given on the LCD ............................ 6.5
Errors accompanied by warnings .................................................................... 6.5
Error messages ............................................................................................... 6.8
Table of contents
- 6.1 -
CHAPTER 6