Setup Functions - MIMAKI JV3-75 SP II Operation Manual

Setup functions

The following describes the overview of and settings for each function.
Name
MEDIACOMP.
HEATER
PRINT MODE
INK LAYERS
DRYING TIMES
AUTO CUT
PRIORITY
PRE-FEED
MARGIN
COLOR PATTERN
REFRESH
MEDIA SET
VACUUM
MM / INCH
STAMP
AUTO CLEANING
SETUP RESET
Correct the amount of feed for media
Set the printer heater condition
Set the plot quality, plot direction, and logical seek
Set the number of over writing
Set an ink drying time
Cut off the media automatically at the end of plotting
Specifies the value set (host /panel)
Feeding the media to back and forth before execute plotting
Set a dead space of the media
Plot a color pattern for Nozzle clogging check
Refreshing the head during plotting
Set the method of the media ditection
Set the absorbability of the media.
Set a unit of set values.
Print the date of output and plotting condition
Head cleaning automatically per plotting
Reset the currenct plotting conditions
Function
- 4.5 -
P.4-6
P.4-6
P.4-7
P.4-8
P.4-8
P.4-8
P.4-8
P.4-9
P.4-9
P.4-9
P.4-9
P.4-10
P.4-10
P.4-10
P.4-10
P.4-10
P.4-10