Configuration And Function; The Front - MIMAKI JV3-75 SP II Operation Manual

Configuration and function

The Front

12 *
11 *
* This drawing illustrates fan
unit set to the plotter. As for
JV3-75SPII, this unit is option.
Name
1 Front cover
2 Carriage
3 Operation panel
4 Capping station
5 Clamp lever
6 Heater operation panel
7 Power switch
8 Waste ink tank
9 Stand
10 Take-up device
11 Drier fan unit *
12 Front exhauster *
13 Printer heater
14 Platen
13
14
It is opened when setting media or taking a corrective measure against a
media jam. Even if the power switch is off, keep the front cover closed to
perform the ink clogging preventive operation.
Moves the print head from side to side.
This panel has the operation keys required for operating the device and
the LCD for displaying set items, etc.
Incorporates the ink cap to be capped on the head and the wiper, etc.
It is made to go up-down the pinch roller for holding media.
Provides the heater power switch and the heater status LED indicator.
It turns on/off the power to the device.
When the power switch is turned on, the POWER indicator lights in
green. While the main power switch is on, the ink clogging preventive
operation is performed periodically even if the power switch is off.
(Flashing)
Waste ink gathers in this tank.
It supports the main unit. It is provided with casters that are used to
move the device.
It supports to wind up the roll media printed.
Dries plotted ink.
Discharges plotting smell from the media to out of the room.
Fixes and dries printing ink. ( Attached inside the platen )
It puts out the media as it is plotted on. Inside the platen, two heaters is
including.
- 1.4 -
1
2
Function
3
4
5
6
7
8
9
10