Switching The Ink From Ss To Ss2 [Ss2< >Sschg] - MIMAKI JV3-75 SP II Operation Manual

Switching the ink from SS to SS2 [SS2< >SSCHG]
Switching the ink from SS to SS2, or the other way around, make sure to perform these procedure as
follows.
• Changing the ink sets (4 colors/6 colors) is not available on this func-
tion. Refer to "Ink exchanging procedure" for changing the ink sets.
STEP
1. Push the [FUNCTION] key on the LOCAL mode.
2. Select the [MAINTENANCE] pushing the [ ] or
[ ] key.
3. Push the [ENTER] key.
Display the [STATION].
4. Select the [SS2<>SSCHG] pushing the [ ] or
[ ] key.
5. Push the [ENTER] key.
6. Remove the ink cartridges.
Discharge the ink to waste ink tank.
7. When the right display appears, set the ink
cartridges.
• When using the SS ink, set the SS2 ink cartridges.
• When using the SS2 ink, set the SS ink cartridges.
After filling up is completing, the menu returns to the LOCAL
mode.
page 5.27
- 5.18 -
FUNCTION
SETUP < ENT >
FUNCTION
MAINTENANCE
MAINTENANCE
STATION
MAINTENANCE
SS2<>SSCHG
DISCHARGE
REMOVE CARTRIDGE
Set a cartridge
FILL UP
PLEASE WAIT
MAINTENANCE
SS2<>SSCHG
< ent >
< ent >
< ent >
< ent >