Routine Maintenance; Notes On Cleaning - MIMAKI JV3-75 SP II Operation Manual

Routine Maintenance

Be sure to conduct maintenance works for the device when necessary or periodically so as to use the
device for a long time while keeping its plotting accuracy.

Notes on cleaning

• When using the maintenance cleaning fluid RS, be sure to wear the protec-
tive glasses.
• Never disassemble the device. Disassembling the device can result in
electric shock hazards and breakage of the device.
• Prevent moisture from entering inside the device. If the inner part of the
device becomes wet, electric shock hazards and breakage of the device can
result.
• Conduct maintenance works after turning off the power switch and detach-
ing the power cable. If not, unexpected troubles can arise.
• Do not wipe the nozzles, wiper, or cap of the head with water of alcohol as
doing so may cause nozzle clogging or damage to nozzles.
• Do not use benzine, thinner and chemical agents containing abrasives.
Such materials can deteriorate or deform the surface of the cover.
• Do not apply lubricating oil or the like inside the device. Such materials can
cause the plotter mechanism to fail.
• Be careful not to allow the maintenance cleaning fluid RS or ink to adhere to
the cover as this may cause deterioration or discoloring of the surface of the
cover.
- 3.2 -