Removing The Cylinder Head - MOTO GUZZI 1200 SPORT 4V Service Station Manual

Engine
Removing the head cover
NOTE
THE OPERATIONS DESCRIBED BELOW REFER TO REMOVING ONLY ONE HEAD BUT APPLY
TO BOTH HEADS.
•
Disconnect the spark plug tube.
•
Unscrew and remove the four head
cover fixing screws and collect the
sealing O-rings.
•
Remove the head cover together with
the gasket.

Removing the cylinder head

CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
•
Remove the head cover.
•
Unscrew and remove the two screws
•
Remove the cap.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 126
1200 SPORT 4V