Warning Window - ashtech DG16 Reference Manual

Table A.1 Message Parameter Pane (Continued)
Item
Description
Request and Response
Messages format
Query Command
Set Command
Request Confirmation
(ACK, NAK)
Save
Cancel

Warning Window

The Warning window reflects errors and warnings. These messages appear
during the files reading and writing, compiling or uploading of a project, etc. and
informs you about ending of some long-run processes, such as the end of
uploading.
Creating a Custom Message
To create a new message:
1. Open the project.
2. Click in the left pane.
3. Select Add New Message from the Edit menu.
4. Start to fill the field of the Message Parameter pane.
5. Select Save Project from the File menu to save the new message.
You can copy, paste from the clipboard, and delete the selected message by using the
corresponding commands in the Edit menu.
330
Displays a brief description of the selected variable.
Displays the messages view.
Displays the query command. If the message header is Ashtech, the
query command format is $PASHQ,NEW, when NEW is the message title.
If the message header is Other, the query command format is NEW,
when NEW is the message title.
Displays the set command. If the message header is Ashtech, the set
command format is $PASHS,UDM,NEW, when NEW is the message title.
If the message header is Other, the query command format is NEW,
when NEW is the message title.
You can mark the check box to get confirmation.
Saves changes.
Restores the last saved state.
DG14 and DG16 Board & Sensor Reference Manual
Description