Dir,Clr: Erase Beacon Directory - ashtech DG16 Reference Manual

$PASHQ,BCN,DIR,USR
This command queries for the Beacon directory for only the user entered stations.
$PASHR,BCN,DIR,n1,n2,s1,f1,f2,c2,f3,d1,d2,d3,d4,d5,d6,d7
The response is in the format
$PASHR,BCN,DIR,n1,n2,s1,f1,f2,c2,f3,d1,d2,d3,d4,d5,d6,d7*hh
Table 9.18 outlines the response parameters.
Table 9.18. $PASHR,BCN,DIR Response Message Parameters
Parameter
n1
n2
s1
f1
c1
f2
c2
f3
d1
d2
d3
d4
d5
d6
d7
*hh

DIR,CLR: Erase Beacon Directory

$PASHS,BCN,DIR,CLR
This command erases the contents of the beacon directory from memory. Upon a
cold start, the DG16 Beacon directory consists of the default list kept in ROM only.
The Beacon Directory can also be reset to the default list of stations with the
$PASHS,BCN,DIR,INI command.
Differential Commands
Description
Total number of DIR messages (stations) in the response
Number of messages remaining to output (countdown)
Source of the information DEF—Default list, RTC—RTCM
Type 7 message, USR—User entered
Latitude
Latitude hemisphere N or S
Longitude
Longitude hemisphere E or W
Frequency
Station ID
Bit Range
Range in Km
Health
Modulation code
Synchronization type
Broadcast code
Checksum
319