Ajm: In-Band Jam Immunity - ashtech DG16 Reference Manual

AJM: In-Band Jam Immunity

$PASHS,AJM,x
This command enables or disables in-band jam immunity where x is ON or OFF.
$PASHQ,AJM
This command queries the in-band jam immunity setting.
$PASHR,AJM
The response is in the format:
$PASHR,AJM,x
where x is ON or OFF.
ALT: Ellipsoidal Height
$PASHS,ALT,f1
This command sets the ellipsoidal height of the antenna, where f1 can be any value
from -99999.99 to +99999.99. The DG16 uses the altitude value set through this
command when it is computing 2D positions.
Example
Enter the following command to set the ellipsoidal height of the antenna to -30.1
meters:
$PASHS,ALT,-30.1
ANH: Antenna Height
$PASHS,ANH,f
This command sets the antenna height where f is from 0.0 to 6.4 meters.
Example:
Enter the following command to set the antenna height to 3.534 meters.
96
DEFAULT SETTING
AJM—OFF
DEFAULT SETTING
ALT—00000.00 meters
DG14 and DG16 Board & Sensor Reference Manual