ashtech DG16 Reference Manual page 114

Function
$PASHS,UCT,UDD,APT Add a point for datum transformation
$PASHS,UCT,UDD,CAL Calculate datum transformation
$PASHQ,UCT,UDD,CAL Query the datum transformation
$PASHS,UCT,UDD,EST Estimate a datum transformation
User-Defined
$PASHS,UCT,UDH,APT Add a point for a local geoidal surface
Transformation
$PASHS,UCT,UDH,CAL Calculate local geoidal surface
$PASHQ,UCT,UDH,CAL Query the local geoidal surface
$PASHS,UCT,UDH,EST Estimate a local geoidal surface
$PASHS,UCT,UG4,APT
$PASHS,UCT, UG4,CAL Calculate grid transformation
$PASHQ,UCT,UG4,CAL Query the grid transformation
$PASHS,UCT,UG4,EST
$PASHS,UD4
$PASHS,UDD
$PASHQ,UDD
$PASHS,UDG
94
Table 6.3. Receiver Commands (Continued)
Command
parameters
parameters
transformation
transformation parameters
transformation parameters
transformation
Add a point for a grid transformation
parameters
parameters
Estimate the grid transformation
Set user-defined datum to datum
parameters
Set the user-defined datum
Query the user-defined datum
Set user-defined datum to grid
transformation
DG14 and DG16 Board & Sensor Reference Manual
Description Default Page
— 164
— 165
— 165
— 166
— 166
— 165
— 165
— 167
— 168
— 168
— 168
— 169
WGS-84 169
— 170
— 170
— 173