Interfaces To External Equipment - ashtech DG16 Reference Manual

Interfaces to External Equipment

DG-16 Board Interfaces
The main interface to the DG16 Board is through the J301 connector. Figure 1.4
shows DG16 interfacing connections for the J301 connector.
Mates with J301 on D 16
Figure 1.4. External Equipment Interfacing Diagram
Figure 1.4 Note
1. Manual reset (MAN_RES) should be left unconnected if unused. Manual
reset should be activated by a switch or open collector gate.
External LEDs support the same features as the on-board LEDs. See "Status
LEDs" on page 6 for more information.
12
G
TXDC
TXDSCI
BATT_IN
COR_LED_RED
GPS LEN RED
GPS LED GREEN
COR_LED_GRN
EXT_LNA_PWR
RXDSCI
CLKSCI
RXDC
DG14 and DG16 Board & Sensor Reference Manual
1